How To Make Low Cost Underwater Camera Housings & Bags


Hello Everybody. Thanks for taking the time to watch my video. I make and sell a very popular underwater video camera housing I designed called the Nemo 200. This Nemo is ideal for recreational scuba divers that need to take video cameras below to 120 feet and be used in a tough marine environment. In the last few years I have been repeatedly asked if I could come up with a much smaller and cheaper design for those people that are not scuba divers but merely wanted to protect their cameras and video cameras while they were surfing or fishing or snorkeling. A lot of charter boat captains want a housing to video their fish as they are brought to the boat and kite boarders and surfers and kayak owners wanted something cheap that would work with their cameras. Over the last two years I have come up with three designs that can be made to fit nearly any small to medium sized camera or video camera. These designs can all be made for less than $15-$20 and should not take much more than an hour or two and they have all been tested to at least 12 feet with no problems. Each design uses off the shelf items. If the housing or bag design shown in the video is too small for your camera all three designs can be made larger by using a larger container or bag which is readily available. The designs are quite simple and once you watch the construction you will see they make a lot of sense. However, some of the assembly methods used were not simple to come up with and took a lot of time to